Guide
From route file to printed tiles
Everything you need to make your first HexTrip tile, from the file you start with to pressing in the red route.
Before you start
- Use a desktop browser. The generator builds detailed 3D models on your own computer. Big tiles take a while, and phones and tablets usually struggle with them.
- Have a route file ready. HexTrip reads GPX, KML and GeoJSON files, and the
locations.jsonfile in a Polarsteps data export. - Nothing is uploaded. Your files are read in the browser. Only the map area is requested from the public elevation and map services. See the privacy page.
Make a trip tile
A trip tile shows a whole trip across one to six flat-top hexagons, each 200 mm across the flats.
- Choose Trip tile mode and load your route file.
- Use Fetch elevation to download the real terrain for the area.
- In the layout map, click hexagons to add or remove them until the route is covered the way you like.
- Adjust the look:
- Turn the map if the trip fits better at an angle.
- Set the relief height and scale the peaks and valleys.
- Set the smallest island and smallest water piece to keep. The counts update as you go.
- The route bench flattens a narrow path under the route so the groove sits cleanly in steep terrain.
- Choose whether each tile is printed in one piece or as two parts: a terrain insert in a separate holder.
- Press Generate tiles and check the 3D preview.
Make a hike cluster
A hike cluster is one 200 mm tile that collects the hikes from a trip: a legend in the centre, six small hexes around it, a diamond for each, and a tray that holds it all.
- Choose Hike cluster mode.
- Add small tiles with + New tile. Each tile is one of three types:
- Hike: a route file. Load several files at once to get several tiles.
- Favourite places: terrain with red dots. Close-ups under 3.5 km across include OpenStreetMap buildings as small blocks. You can fill the dots from the trip's longest stops.
- Photo: a frame for a 10 × 15 cm print that presses into place.
- Put the tiles in any slot order. Empty slots get plain fillers.
- Check the diamonds. Each shows the hike's name, region, date, distance, climb and a height profile, or the place names in dot order.
- Check the legend. The lines above and below the headline fill in from the trip: dates, total distance and days, hike count, distance and climb. You can edit them, and Auto puts them back.
If the cluster hangs next to a trip tile, the tray leaves out its border on the joining edge, and the water numbering continues from the trip.
Download the parts
Download all (zip) gives you every printed part exactly once, each as its own STL file:
- water pieces are named by the number engraved underneath;
- each red inlay has its own file;
- identical parts, like fillers and photo frames, come as one file with the print count in the name.
The zip also contains a settings file. Keep it: loading it later reopens the design exactly as you left it.
Print the fit test plate first, once for each printer and filament. It's one small print (about 25 g) with every part that needs a fit, in labelled variants around your current settings. Enter the ones that fit best under Printer fit before you print a 200 mm tile.
Print and assemble
All tiles follow the same standard, Series v1, so tiles from different trips fit together on the wall.
| Series v1 | Value |
|---|---|
| Hex size | 200 mm across the flats |
| Border | 4 mm |
| Route groove | 1.8 mm wide, 1.5 mm deep, for a 1.75 mm filament strand |
| River groove | 2.0 mm wide |
| Water inserts | 2.0 mm thick, top 0.6 mm below the shore |
| Start dot | 5 mm across, 1.6 mm deep |
| Clearance | 0.3 mm for sockets, 0.4 mm for holders |
Colours without paint
Every colour on a HexTrip tile is filament. The route is a length of red TPU pressed into its groove, rivers are blue strands, and sea and lakes are separate blue inserts. A single-extruder printer is enough. Raised legend text needs one manual filament change.
The reference prints use:
| Part | Filament |
|---|---|
| Terrain | Prusament PLA Marble Grey |
| Water | Prusament PLA Chalky Blue |
| Route strands and start dots | Prusament TPU 95A Lipstick Red |
| Holders and frames | Polymaker Panchroma Matte Pastel Peanut |
Any similar colours work. Keep the red route the strongest colour on the tile.
Good to know
- Map servers can be busy. Coastline, lakes and buildings come from public OpenStreetMap (Overpass) servers. They limit how often they can be asked and are sometimes down. If a request fails, wait a minute and try again.
- Flights and ferries. Use the setting that leaves out long jumps so flights don't draw a line across the map. Ferry distances depend on the elevation data, so the legend shows total distance and days by default.
- Sharing your tiles. If you post photos of tiles that include coastline, lakes or buildings, credit "© OpenStreetMap contributors".